Take Control Of Your Indoor Climate!

How To Change Filter On Goodman Air Conditioner?




If you own a Goodman air conditioner, then you know how important it is to keep its filters clean and well-maintained.

Turn off the power, locate the filter compartment, remove the old filter, insert the new filter in the correct direction, and close the compartment.

Dirty filters can decrease your AC’s efficiency, raise your energy bills, and even cause health problems for you and your family.

Fortunately, changing the filter on your Goodman air conditioner is a simple task that you can do easily by yourself.

In this article, we’ll guide you through the process of changing the filter on your Goodman air conditioner step-by-step.

We’ll explain why it’s important to change the filter regularly, and give you some tips for choosing the right type of filter for your specific needs.

By following our instructions, you’ll be able to maintain your AC unit in top condition and enjoy cool, fresh air all summer long.

Overview Of The Process

Changing the filter on your Goodman air conditioner is a simple process that can improve the air quality in your home and extend the lifespan of your unit.

First, locate the air filter on your air conditioner. It is typically located behind the front grille or on the side of the unit.

Once you have located the filter, turn off your air conditioner before attempting to remove it. This will prevent any debris or dust from being blown around your home during the replacement process.

Now that you have an overview of the process, let’s review some safety guidelines to ensure a smooth and safe filter change.

Safety Guidelines

To ensure personal protection while changing a Goodman air conditioner filter, it’s important to wear protective gloves and eyewear. It’s also important to make sure the power to the unit is off before beginning any electrical work.

Personal Protection

Imagine you’re about to change the filter on your Goodman air conditioner, but before doing so, it’s important to consider your personal protection.

First and foremost, turn off the power supply to avoid any risk of electrocution.

Next, put on a pair of gloves to protect your hands from sharp edges or debris that may be present around the unit.

Additionally, wear a mask to prevent inhaling dust or other particles that may have accumulated in the old filter over time.

By taking these simple precautions, you can ensure a safe and successful filter change without any harm or injury.

Electrical Safety

Now that we have covered the importance of personal protection when changing air filters, let’s discuss electrical safety guidelines.

Before attempting any maintenance on your Goodman air conditioner, it is crucial to turn off the power supply. This ensures that there is no risk of electrocution while handling the unit.

It is also recommended to wear rubber-soled shoes and avoid touching any electrical components unless you are a trained professional. By following these precautions, you can prevent any accidents or injuries related to electrical shock.

Step-By-Step Guide

Let’s start by looking at how to remove the old filter, then we’ll move on to installing the new one. We’ll need a few tools and supplies, so let’s get everything ready before we begin.

Removing The Old Filter

Are you tired of breathing in dusty air from your Goodman air conditioner? It’s time to change the filter!

To start, locate the filter compartment on your unit. Most Goodman air conditioners have a removable front panel that houses the filter. Remove this panel by pulling it towards you or unscrewing any screws holding it in place.

Once removed, carefully slide out the old filter and dispose of it properly. Be sure to vacuum or wipe down any debris that may have accumulated in the compartment before inserting the new filter.

Installing The New Filter

Now that you have removed the old filter from your Goodman air conditioner, it’s time to install the new one.

Make sure to read the instructions on the packaging to ensure that you are inserting the filter correctly. Most filters will have arrows indicating which way they should be facing.

Once you have confirmed this, slide the new filter into place and replace the front panel of your unit. Be sure to secure any screws or clips that were holding it in place.

With a new filter installed, you can now enjoy cleaner and fresher air in your home!

Troubleshooting Tips

Now that you know how to change the filter on your Goodman air conditioner, there may still be some issues that you encounter. Fortunately, there are a few troubleshooting tips that can help you address these problems.

If your air conditioner is not cooling properly, check to make sure that the thermostat is set to the correct temperature and mode.

Additionally, ensure that all of the vents are open and unobstructed.

If this doesn’t solve the issue, it could be a problem with the compressor or refrigerant levels, which will require professional assistance.

By following these simple steps and seeking professional help when necessary, you can keep your Goodman air conditioner running smoothly all summer long.


Overall, changing the filter on your Goodman air conditioner is a simple task that can help keep your unit running efficiently and prevent costly repairs. By following the safety guidelines and step-by-step guide outlined above, you can easily replace your filter in just a few minutes.

It’s important to remember that neglecting to change your air filter regularly can result in poor indoor air quality, reduced airflow, and even damage to your unit. By taking the time to change your filter every one to three months, depending on usage and other factors, you can improve the overall comfort and health of your home.

If you encounter any issues during the filter replacement process or notice any unusual sounds or smells coming from your air conditioner afterwards, be sure to consult the troubleshooting tips provided above or contact a professional HVAC technician for assistance.

With proper maintenance and care, your Goodman air conditioner can continue to provide reliable cooling for years to come.

About the author

Latest posts

  • What does the switch on a ceiling fan do?

    What does the switch on a ceiling fan do?

    When it comes to ceiling fans, there is one mysterious switch that often confuses people. What does it do? Well, let me shed some light on this intriguing question for you. You see, the switch on a ceiling fan serves a crucial purpose – it reverses the direction of rotation of the fan blades. This…

    Read more

  • Can A Gas Water Heater Sit Directly On The Floor?

    Can A Gas Water Heater Sit Directly On The Floor?

    Are you tired of the same old water heater designs? Do you want to explore new and innovative ways to heat your water? Well, you’re in luck because we’ve got a hot topic that’s sure to spark your interest: can a gas water heater sit directly on the floor? Yes, a gas water heater can…

    Read more

  • Can A Clogged Air Filter Cause Overheating?

    Can A Clogged Air Filter Cause Overheating?

    Have you ever experienced an overheated engine while driving? It’s a frustrating and potentially dangerous scenario that can leave you stranded on the side of the road. Yes, a clogged air filter can cause overheating. While there are several potential causes for engine overheating, one often overlooked culprit is a clogged air filter. Air filters…

    Read more